Skip to content

Cora Clean

Cora Clean Cora Clean

The Cora Clean eliminates residue in espresso group heads, valves and water lines. It is designed for traditional espresso machines.

  • Concentrated formula eliminates residue in group heads, valves and machine lines.
  • Integral to the daily back flush regimen.
  • Foam and solubility balanced for optimal rinsing.
  • NSF certified for metal compatibility and safety and OMRI™ Listed for use in Organic Production.


Note: Back flush each group head 1. Insert blind filter in portafilter and add up to 1/2 teaspoon (3 g) of Cafiza® Powder. Insert portafilter into group head. 2. Activate brew cycle for 10 seconds. Stop 10 seconds. Repeat 5 times. 3. Remove portafilter. Activate brew cycle and rinse portafilter in stream of water from group head. Stop cycle. 4. Insert portafilter into group head. Repeat step (2) without Cafiza® Powder 5 times. 5. Make and discard a cup of espresso to ensure no residue remains.
Soak: 1. Soak filters and metal of portafilter for 30 minutes in 1 teaspoon (6 g) of Cafiza® Powder per 32 oz. (1 L) of hot water. 2. Rinse with clean hot water.
For Use on Coffee Brewers 1. Empty coffee from equipment. Sprinkle 1/2 teaspoon (3g) of Cafiza® powder per 64 oz. (2L) of brewer capacity directly into brew basket. 2. Run a full brew cycle into each vessel and hold for 30 minutes. 3. Empty each vessel and rinse all parts with clean hot water.
Wet cloth with Cafiza® Powder solution and wipe down spray heads, then wipe clean. Caution: Solution may be very hot.

To purchase Cora Clean you must call or come in because this actually costs less than Urnex Cafiza.



The post Cora Clean appeared first on Whats Brewing at Cora.

Back to blog